Applications in the plant construction sector

The mechanical industry has always faced the challenge of ensuring maximum precision in the parts produced, especially when it comes to components made through fine blanking. The flatness of these parts, often vital for the automotive and electronics sectors, represents one of the most critical aspects to monitor to ensure performance and reliability. In this context, RODER technology introduces an advanced solution with its DIGICHECK system, marking a significant step towards efficiency and precision in measurement…

In a business ecosystem where sustainability and operational efficiency become imperative, technological innovation in the field of traceability of recycling supply chains emerges as a key element in the paper sector. The advent of recent regulations underlines the importance of advanced systems for the digital surveillance of processes, especially in the phase concerning the separate collection and subsequent recovery of paper and cardboard. In this context, RODER SRL responds to the growing tracking needs of the entire supply chain with a pioneering project, currently in the operational testing phase, which makes use of RFID technology for the unique and widespread monitoring of raw materials...

The VISIONCHECK-AI system allows the control of defects on continuous products with the use of artificial intelligence VISIONCHECK-AI is an intelligent inspection system dedicated to the control of defects on continuous products, based on artificial intelligence algorithms, a product developed by RODER LLC. The system uses advanced vision technology to detect and classify defects on continuous products with unprecedented accuracy and precision. The system is suitable for a wide range of industries, including metals, automotive, aerospace and electronics. With its unique combination of accuracy and convenience, VISIONCHECK-AI offers a truly versatile solution for…

Measuring the humidity of recycled paper bales is a fundamental parameter for many sectors, including the paper and converting industry. To have precise control of the humidity present in materials and structures, it is possible to use portable measuring instruments such as the RODER RP6. This innovative instrument allows you to measure the humidity of paper, cardboard, corrugated cardboard, paper and cardboard, and many other materials quickly, precisely and effectively. Thanks to its portability, the RODER RP6 can be used anywhere, both in the laboratory and in the field, offering highly reliable results. The RODER RP6 uses capacitive technology to…

Measuring the position of beams and pipes in the position line is essential for correct management of production and plant logistics. LASER technology establishes itself as a fundamental ally in professional measurement processes, thanks to its precision and ease of use. Today, engineers and specialized technicians can enjoy the potential offered by laser distance meters, cutting-edge tools for accurately detecting distances. RODER has produced a specific application kit that can elevate the experience of using these devices, optimizing their application in professional contexts. LASER distance meters are devices used to measure a distance in…

The DIACHECK-CT series digital archmeter allows bending control on tube benders and direct and instantaneous reading of internal or external radii or diameters in a range between 100 and 10000 mm. Bending control on tube and profile bending machines represents a frequent industrial application. The high-precision archimeter of the DIACHECK-CT series is designed to measure the radius of curved objects such as pipes, profiles and calenders quickly and accurately. The archimeter allows the measurement of the radius of curvature or the internal or external diameter of a specific detail using the method of circumferential measurement based on ...

Thanks to the AK1 Kit it is possible to evaluate the performance of the LDM42 industrial LASER distance meters in a very short time and without the help of an installer or software engineer. Simply connect the power socket, position the distance meter in front of the target to be measured and the sensor will immediately show the value on the display. The AK1 Kit was designed to simplify the use of the LDM42 industrial LASER distance meters, making it accessible to everyone, even to unqualified personnel. In manufacturing environments, accuracy in the placement of materials and structures is crucial. Often, using LASER distance meters is the ideal solution, but the installation process…

LASER technology establishes itself as a fundamental ally in professional measurement processes, thanks to its precision and ease of use. Today, engineers and specialized technicians can enjoy the potential offered by laser distance meters, cutting-edge tools for accurately detecting distances. RODER has produced a specific application kit that can elevate the experience of using these devices, optimizing their application in professional contexts. LASER distance meters are devices used to measure a distance precisely, through the use of a laser beam. Excellence in terms of precision and the ability to take measurements in large and hostile spaces…

LED lighting systems with camera fixing bracket for ROBOT guidance and industrial automation. LED technology has brought a real revolution in the field of industrial automation, guaranteeing effective and long-lasting lighting for ROBOT guidance and artificial vision systems. Thanks to the high brightness of the LED illuminators produced by RODER, industrial cameras are able to detect even the smallest details on complex production lines, allowing real-time monitoring of the processing status. Furthermore, the integration of high-power LED illuminators with remote control functions has made it possible to…

The DIACHECK-CT series digital radius and diameter meter allows direct and instantaneous reading of internal or external radii or diameters in a range between 100 and 10000 mm. The DIACHECK-CT series high-precision digital radius and diameter meter is designed to measure the radius of curved objects such as profiles, calenders, supports, sashes and guards quickly and accurately. This measuring instrument allows the measurement of the radius of curvature or the internal or external diameter of a specific part using the method of circumferential measurement based on three points...

LED backlight systems for industrial automation and machine vision applications. LED backlight systems are becoming increasingly widespread and popular in computer vision applications. Thanks to their low cost, great energy efficiency and long life, they are the ideal choice for many applications where it is necessary to illuminate an area uniformly. In particular, the use of LED backlighting is now the preferred choice for analyzing the shape and size of objects in a variety of applications. LED backlighting is a lighting method in which the…

The DIACHECK-CT series digital radius and diameter meter allows direct and instantaneous reading of internal or external radii or diameters in a range between 100 and 10000 mm. The DIACHECK-CT series high-precision digital radius and diameter meter is designed to measure the radius of cylindrical objects such as pipes, profiles and calenders quickly and accurately. This measuring instrument allows the measurement of the radius of curvature or the internal or external diameter of a specific part using the three-point circumferential measurement method. Archimeters for…

The DIACHECK-CT series digital radius and diameter meter allows direct and instantaneous reading of internal or external radii or diameters in a range between 100 and 10000 mm. The DIACHECK-CT series high-precision digital radius and diameter meter is designed to measure the radius of curved objects such as pipes, profiles and calenders quickly and accurately. This measuring instrument allows the measurement of the radius of curvature or the internal or external diameter of a specific part using the three-point circumferential measurement method. The DIACHECT-CT…

Systems for measuring the position, displacement and deformation of large structures can be extremely complex. Laser dimensional inspection technology offers a simple and effective way to address these issues. Laser distance meters are devices that use a light beam to measure the distance between two points with high precision and accuracy. This equipment can be used on structures such as bridges, buildings and ships, among many others, in numerous industrial applications. LASER distance meters are designed to meet rigorous demands in terms of precision, accuracy and performance. They feature a dynamic range of 100…

Defect inspection systems on continuous products, wire, tubes and cables are an important part of any production line. Quality control is key in these industries and using the correct systems ensures product safety and reliability. Vision systems, laser micrometers, and optical inspection tools are three common tools used to inspect defects. Vision systems use cameras to capture images of objects and analyze them for any imperfections or defects. The cameras can detect defects such as scratches, breaks, cracks, bends, misalignments, etc. It's about…

RODER LDM42 series laser distance meters provide efficient level measurement in tanks, silos or large containers. The RODER system offers automatic level display on remote monitors to facilitate monitoring, measurement and traceability of material levels. It also features a built-in two-way communication system to ensure accurate and reliable data transmission over long distances. Thanks to the RODER system, the responsible technicians are able to remotely monitor the contents of the tanks without having to access them. In this way you not only save time but also money, thanks to the reduction of…

LVDT linear transducers allow precision measurements on mechanical parts or on any object that can be measured with a contact probe. Combined with special signal amplifiers, they allow the measurement of dimensional characteristics (thickness, width, positions, heights, diameters, ovality) and geometric characteristics (planarity, parallelism, perpendicularity, oscillation, eccentricity and coaxiality) with thousandth precision even on complex mechanical details. LVDT transducers with spring drive system (with fixed mechanical preload) or linear LVDT transducers with pneumatic drive can be created, particularly suitable for automatic measurement systems. Some families of LVDT probes can be…

Measuring instruments with LVDT transducers for diameter, ovality, taper and concentricity measurements of internal diameters. Measuring instruments for use on manual, semi-automatic and automatic measuring benches. Customized measuring pads for precision measurements of internal diameters, ovality, taper and concentricity. Multilevel diameter measurement, ovality, concentricity and taper with a single instrument and with a single positioning operation. Measurements of bearing seats, cylinder liners, internal diameters of gears, counterbores and mounting seats, ground tubes and precision bores. Measurement taking with manual, semi-automatic or fully automatic positioning on robotic production lines...

Laser micrometers for diameter and width measurement on the production line. The measurement of diameter and width with laser micrometers allows the control of the dimensions of continuous products directly on the production line, without contact and in maximum safety for the operator. LASER micrometers for measuring diameter and ovality on cylindrical parts directly on the production line or in the metrological laboratory. Measurements of wires, tubes, cables, bars, plugs, extruded and drawn parts. Comparison with tolerance thresholds and alarms for reporting non-compliant products. Possibility of transmitting the data to a PLC…

Applications for measuring distance, positions, lengths and depths with industrial laser distance meters for the steel and metallurgical sector. Generation of out-of-tolerance alarms with visual signaling (light turret) or with electrical contact for sirens and alarms. Direct connection to PLC, SCADA systems or remote data acquisition systems. Visualization of the measurement on giant displays with management of remote transmission of the acquired data or with integrated data logger for process traceability. Measurement of objects up to 30 meters on a natural surface and up to 100 meters on a reflective surface. RODER presents the new series…

Level measurement in tanks and silos with continuous monitoring of the level trend Generation of low level or overflow alarms Automatic calculation of volume or weight with continuous monitoring on multiple tanks RODER presents the new series of giant REDAM LDM displays to create systems display and monitoring to be connected to LDM series LASER distance meters. The REDAM LDM series has been specifically developed for connection with LDM series LASER distance meters allowing real-time display of the measurement carried out by the LASER distance meter. The visualization takes place on a giant display or transmitted to remote terminals via networks...

Profile detection of railway halls with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control dimensions Applications on robotic islands, on Cartesian axes or in automatic assembly islands. 3D laser scanning technique based on optical triangulation technology and the reconstruction of profiles with point clouds. Systems for profile measurement through the detection of point clouds in 3 dimensions and consequent numerical processing…

Detection of camshaft profile with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control dimensions Applications on robotic islands, on Cartesian axes or in automatic assembly islands. Control island that allows the recording of the TDC (top dead centre) of a combustion engine. The system provides for the controlled movement of the crankshaft until it reaches a precise position (TDC) and allows the correct assembly of the …

Detection of hardness of pressed, sheared, drawn or welded sheet metal parts with extraction of geometric or dimensional information Measurement of forces, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control quotas Applications on robotized cells, on Cartesian axes or in automatic assembly cells. Verification cell that allows the non-destructive control of mechanical parts directly on the production line. It is characterized by an autonomous platform which integrates an automatic manipulator capable of picking up the piece directly from...

Profile detection of pressed, blanked, drawn or welded sheet metal parts with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the model mathematical for the determination of control quotas Applications on robotic islands, on Cartesian axes or in automatic assembly islands Industrial data acquisition stations, complete with software, touch screen and multifunction keys. Conceived and designed specifically for the production line control sector and mechanical workshops. Completely fanless and diskless architecture for…

Detection of dimensions of pressed, sheared, drawn or welded sheet metal parts with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the model mathematical for the determination of control quotas Applications on robotic islands, on Cartesian axes or in automatic assembly islands Industrial data acquisition stations, complete with software, touch screen and multifunction keys. Conceived and designed specifically for the production line control sector and mechanical workshops. Completely fanless and diskless architecture for…

Detection of diameter and ovality with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control dimensions Applications on robotic islands, on Cartesian axes or in automatic assembly islands. Measurement with high-precision, non-contact LASER technology, even on high-speed, easily deformable or high-temperature materials. Systems with fixed or tilting LASER sources capable of carrying out analyzes even on square, rectangular or hexagonal sections. Versions…

Measurement of the thickness and width of strips directly on the production line. Measurement of thickness and width to verify the correct execution of the processes or as preparation for welding and assembly operations. Comparison with the tolerances in the specifications for the real-time determination of tolerance or non-conformity holes. Applications on pickling, cutting, shearing and profiling lines. The use of LASER light, magnetic and optical technologies makes it possible to obtain high precision and speed without direct contact of the measuring instrument with the material. Possibility of measurement on systems with high flow speed or in non… areas

Profile detection of welded details with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control dimensions Applications on robotic islands, on Cartesian axes or in automatic assembly islands. 3D laser scanning technique based on optical triangulation technology and the reconstruction of profiles with point clouds. Systems for profile measurement through the detection of point clouds in 3 dimensions and consequent numerical processing…

Profile detection of rubber and latex details with extraction of geometric or dimensional information Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for welding and assembly operations Comparison with the mathematical model for the determination of control dimensions Applications on robotic islands, on Cartesian axes or in automatic assembly islands Copyright by RODER SRL – All rights reserved – Application note AN0088 …