The systems division of RODER SRL is specialized in the creation of machines and measuring systems for non-destructive quality controlStarting from the customer's needs we develop the mechanical equipment, automation systems and of control software necessary to coordinate all the control and interfacing operations on the production line. We provide “turnkey” solutions with relative assistance for production, staff training and periodic maintenance. We work closely with the customer and with technology suppliers to create machines and systems that put our customer in a position to increased competitiveness on its target market.
LASER measuring systems
Systems for the dimensional and geometric measurement through the detection of point clouds in 3 dimensions. Numerical processing of point clouds and comparison with a mathematical model.
- 2D and 3D profile measurements
- Geometric and dimensional control
- Comparison with mathematical model
- Production data management with reference to production batches
- Non-contact measurement
- Interaxis, flatness, straightness measurements
- Measurement on easily deformable materials
RING-CHECK series measuring systems
LASER light measuring systems for measuring diameter, ovality and concentricity of rings and washers. Systems for non-contact control of diameter, ovality and concentricity.
System based on LASER light beams for measuring the external and internal diameter of sealing rings, washers or sections of cylindrical parts. The measurement of the internal and external diameter of the detail, with multi-section relief also of the thickness of the circular crown, allows the automatic calculation of the ovality and concentricity values. Wide range of measurement ranges and achievable accuracies. Solutions with manual loading of the
particular or with
System based on LASER light beams for measuring the external and internal diameter of sealing rings, washers or sections of cylindrical parts. The measurement of the internal and external diameter of the detail, with multi-section relief also of the thickness of the circular crown, allows the automatic calculation of the ovality and concentricity values. Wide range of measurement ranges and achievable accuracies. Solutions with manual loading of the
particular or with
Measuring systems MDD-MDS series
Systems for measuring the diameter and ovality of
continuous products directly online of
production with LASER technology Models with static and dynamic LASER sensors.
Measurement with high-precision, non-contact LASER technology, even on high-speed, easily deformable or high-temperature materials.
Systems with fixed LASER sources
or overhead doors capable of carrying out
analysis also on square sections,
rectangular or hexagonal. Versions for high temperatures or environments with the presence of environmental contaminants.
Interface with line PLC and management software. LASER with high scanning speed and precision.
LASER systems with accuracies up to +/- 1 micron and up to 2000 scans per
second.
continuous products directly online of
production with LASER technology Models with static and dynamic LASER sensors.
Measurement with high-precision, non-contact LASER technology, even on high-speed, easily deformable or high-temperature materials.
Systems with fixed LASER sources
or overhead doors capable of carrying out
analysis also on square sections,
rectangular or hexagonal. Versions for high temperatures or environments with the presence of environmental contaminants.
Interface with line PLC and management software. LASER with high scanning speed and precision.
LASER systems with accuracies up to +/- 1 micron and up to 2000 scans per
second.
SCAN-T series measuring systems
Thickness measuring systems with continuous scanning laser sensors Complete systems for the control of
thickness through continuous scanning of the material.
Measurement of thickness, width and density
directly on the production line. Real-time control software
of the thickness distribution. Immediate comparison with tolerances and
with the ideal profile with automatic generation of alarms and signals
machine correction. Software for profile analysis and
control of the extrusion head.
Data analysis software with automatic calculation of the average thickness of the profile and of the thicknesses of the individual areas. Possibility of
connection to an automatic process control system.
thickness through continuous scanning of the material.
Measurement of thickness, width and density
directly on the production line. Real-time control software
of the thickness distribution. Immediate comparison with tolerances and
with the ideal profile with automatic generation of alarms and signals
machine correction. Software for profile analysis and
control of the extrusion head.
Data analysis software with automatic calculation of the average thickness of the profile and of the thicknesses of the individual areas. Possibility of
connection to an automatic process control system.
PROFIX 3D series measuring systems
Systems for the profile measurement through the detection of 3D point clouds and subsequent numerical processing of the maps. Technique of 3D laser scanning based on optical triangulation technology and profile reconstruction with point clouds. LASER technology allows to obtain very high precision even on complex objects and materials with different optical characteristics. A wide range of processing systems and image reconstruction techniques allow to extract the desired dimensional and geometric information. Complex profile analysis The LASER measurement technology combined with the most modern digital processing technologies e
PROFIX 2D series measuring systems
Profile analysis systems with LASER light sources e 2D dimensional reconstruction at high speed. Complete systems for profile control based on the principle
of LASER triangulation .
Systems for the thickness measurement,
width, height, radii of curvature,
groove width directly in line of
production. Software for real-time control of geometries and dimensions. Immediate comparison with tolerances and automatic generation of alarms and machine correction signals. Profile detection of welded parts with extraction of geometric or dimensional information. Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for operations
of LASER triangulation .
Systems for the thickness measurement,
width, height, radii of curvature,
groove width directly in line of
production. Software for real-time control of geometries and dimensions. Immediate comparison with tolerances and automatic generation of alarms and machine correction signals. Profile detection of welded parts with extraction of geometric or dimensional information. Measurement of angles, distances, openings, positions to verify the correct execution of the processes or as preparation for operations
SCAN-TT measuring systems
Thickness and width measuring systems for flat materials in motion directly on the production line RODER SRL proposes the new series of SCAN-TT systems for the measurement of thickness and width in production line. Suitable for real-time measurement of thickness and width: strips, laminates, extrusions, strips, calendered, plates, profiles and discrete or continuous flat productsThe SCANT-TT family represents the natural evolution of a series of sensors, systems and software initially developed to satisfy particular measurement needs (custom systems specifically created for particular production needs) and subsequently engineered
LASER thickness gauges DIMES-LTM-LWM series
LASER thickness gauges for measuring the thickness and width of strips and sheets DIMES-LTM-LWM series. Suitable for industrial applications where it is necessary to integrate both thickness measurement and width measurement in a single system. The DIMES-LTM-LWM system integrates in a single system:
- Double thickness measuring head on the sides
- Measure the thickness in the center of the tape
- Width measurement
- Automatic centering of the measuring point with active edge tracking
- Industrial I/O interface for connection to PLC and SCADA/MES systems
- Generation of Industry 4.0 standard control reports
- Provision for remote assistance and control from
TUBIX series measuring systems
Systems for measuring wall thickness, diameter and ovality of metal, plastic, glass, foam, cardboard and rubber tubes. Customized support mechanics.
Benchtop systems for the laboratory
metrological or on-board machines designed for the measurement of internal diameter, external diameter, ovality and wall thickness of pipe samples. The use of LASER technology allows to carry out measurements without contact and without deformation of the sample.
Ideal for measuring pipes made of easily deformable materials (rubber, paper and cardboard, expanded materials and low density plastics). Complete analysis of all dimensional and geometric parameters of the
pipe section with a single
Benchtop systems for the laboratory
metrological or on-board machines designed for the measurement of internal diameter, external diameter, ovality and wall thickness of pipe samples. The use of LASER technology allows to carry out measurements without contact and without deformation of the sample.
Ideal for measuring pipes made of easily deformable materials (rubber, paper and cardboard, expanded materials and low density plastics). Complete analysis of all dimensional and geometric parameters of the
pipe section with a single
Machine Vision Systems
“All in one” artificial vision system for quality control in production lines, on automatic machines and manual test benchesThe new systems of the VISION CHECK 2000 series integrate a powerful artificial vision system, based on latest generation image processing algorithms, a touch screen video interface and all the electronics necessary for interfacing with the production line or for the remote control through fieldbus or standard I/O. The powerful functions provided by the control station allow you to perform both visual inspection what operations of dimensional and geometric control.
VIDEOSHOT series artificial vision systems
Photographic systems for use in data acquisition and process control applications in industrial environment. Photographic shooting on command from PLC or manual systems. Wide range of interfaces for connecting peripherals and acquisition systems. Fanless and diskless architecture for high reliability even in environments with high contaminants or in the presence of vibrations “All in one” artificial vision system for quality control in production lines, on automatic machines and manual test benchesThe new systems of the VIDEOSHOT series integrate a powerful artificial vision system, based on algorithms
VISION CHECK 2000 series artificial vision systems
“All in one” artificial vision system for quality control in production lines, on automatic machines and manual test benchesThe new systems of the VISION CHECK 2000 series integrate a powerful artificial vision system, based on latest generation image processing algorithms, a touch screen video interface and all the electronics necessary for interfacing with the production line or for the remote control through fieldbus or standard I/O. The powerful functions provided by the control station allow you to perform both visual inspection what operations of dimensional and geometric control.
VISION CHECK vision systems
“All in one” artificial vision system for quality control in production lines, on automatic machines and manual test benchesThe new systems of the VISION CHECK 2000 series integrate a powerful artificial vision system, based on latest generation image processing algorithms, a touch screen video interface and all the electronics necessary for interfacing with the production line or for the remote control through fieldbus or standard I/O. The powerful functions provided by the control station allow you to perform both visual inspection what operations of dimensional and geometric control.
VISION CHECK series measuring systems
“All in one” artificial vision system for quality control in production lines, on automatic machines and manual test benchesThe new systems of the VISION CHECK 2000 series integrate a powerful artificial vision system, based on latest generation image processing algorithms, a touch screen video interface and all the electronics necessary for interfacing with the production line or for the remote control through fieldbus or standard I/O. The powerful functions provided by the control station allow you to perform both visual inspection what operations of dimensional and geometric control.
Smart Cloud Systems
SIMEX – Smart Inventory & Manufacturing Efficiency eXecution In the modern industrial landscape, the control and optimization of production processes are fundamental elements to guarantee efficiency and competitiveness. Smart cloud systems SIMEX – Smart Inventory & Manufacturing Efficiency eXecution were created with the aim of offering an advanced solution for monitoring and managing warehouses and production lines. Real-Time Data Acquisition and Analysis SIMEX smart cloud systems enable automatic data acquisition directly from production lines, offering a clear and detailed view of plant performance. Thanks to the intuitive interface, operators can monitor
SIMEX – Smart Inventory & Manufacturing Efficiency eXecution
Management system for the flow of materials entering and exiting the warehouse and production lines.
- Real-time monitoring of production
- Generazione efficiency report and productivity
- Integration with SCADA, MES and ERP control systems
- RFID Management and barcode
- Virtual warehouse management
- Management of interface with production
- System cloud web
Measurement automation systems
Robotized control islands for the inspection of mechanical parts with picking and unloading directly on the production line RODER SRL proposes the new series of CHECK-ISL robotic systems for the automatic measurement in production line of dimensional quantities, geometric and visual parameters. The CHECK-ISL family represents the natural evolution of a series of systems developed initially to meet particular measurement needs (custom systems made specifically for particular production needs) and subsequently engineered and standardized to become a tested and reliable system that can be proposed in various production sectors and adapted to any production or
Measurement systems CHECK-ISL
Robotized control islands for the inspection of mechanical parts with picking and unloading directly on the production line RODER SRL proposes the new series of CHECK-ISL robotic systems for the automatic measurement in production line of dimensional quantities, geometric and visual parameters. The CHECK-ISL family represents the natural evolution of a series of systems developed initially to meet particular measurement needs (custom systems made specifically for particular production needs) and subsequently engineered and standardized to become a tested and reliable system that can be proposed in various production sectors and adapted to any production or
Dimensional control systems
RODER presents LTM-1000 the new non-contact measuring systems for measuring thickness and width with LASER technology.
Used in all applications that require an economical and easy-to-use system, the LTM-1000 allows you to measure the thickness or width of continuous or discontinuous materials through laser light sources. The measurement is non-contact and allows dimensional checks even on moving materials, materials that are easily deformed or not measurable with traditional contact measurement techniques. The measurement can be displayed directly on the instrument and can be generated by programmable alarm thresholds or by signals
Used in all applications that require an economical and easy-to-use system, the LTM-1000 allows you to measure the thickness or width of continuous or discontinuous materials through laser light sources. The measurement is non-contact and allows dimensional checks even on moving materials, materials that are easily deformed or not measurable with traditional contact measurement techniques. The measurement can be displayed directly on the instrument and can be generated by programmable alarm thresholds or by signals
Non-contact dimensional inspection systems based on laser sources represent an advanced technology for the precise measurement of moving or difficult-to-access objects. Using laser light beams, these systems acquire dimensional data in real time, allowing parameters such as thickness, diameter and ovality to be monitored without risking damage to the material.
Laser technology offers high precision and speed, making these systems ideal for industrial applications where ensuring product quality is essential. Measurement results are processed quickly and can be integrated into automated production lines, allowing continuous, real-time quality control.
Furthermore, laser systems can be easily adapted to different production needs and configurations, making them versatile and highly efficient. This technology helps to optimize production processes, reducing waste and increasing the reliability of quality control.
Do you want help in choosing the product?
Copyright by RODER SRL – Oglianico (TO) – Italy
Website : www.roder.it
Computer Vision Division: www.rodervision.com
Measuring instruments division: www.innovacheck.com