Mechanical sector applications Archives -

Flatness measurement with multi-dimension control units and LVDT linear transducers

digicheck measures flatness with lvdt probes and multi-dimension electronic controller

Flatness measurement is a method used for measure flatness of a surface or a piece.

It is an important part of many industrial processes and can be done with different techniques. One of the most common methods for measuring flatness is theuse of LVDT probes and linear transducers. This method has become increasingly popular due to its high accuracy and reliability.

For measurements obtained from LVDT probes and linear transducers, amulti-dimension control unit, to ensure uniformity across multiple parts or surfaces to be measured. This control unit uses multiple sensors placed on the surface to be measured, obtaining readings from each sensor at different points on the surface. The acquired data is then compared with predetermined values, which allow to obtain accurate measurements with minimal variations between the various measurement points.

Continue reading →

Dimensional checks with multi-quota control units and LVDT linear transducers

MODULCHECK series dimensional and geometric control systems allow the measurement and determination of conformity of mechanical parts and discrete objects using objective measurement procedures that can be easily managed even by non-expert personnel. The innovative architecture on which the MODULCHECK system is based allows the creation of dimensional and geometric test benches (static or dynamic) using easily available equipment and sensors and easily editable during setup or directly in production also by the end customer.

MODULCHECK systems are suitable for measurements directly on the production line and also managed by unqualified personnel. The visualization interface has been deliberately made simple and easy to consult but without renouncing the powerful mathematical functions intended for the analysis of dimensional and geometric characteristics.

All production data are stored in a local database with the possibility of transferring or synchronizing with existing databases (SQL, XML or CSV) for a complete and reliable analysis of data in real time.

Continue reading →

Automation sector applications, Automotive sector applications, Carpentry and heavy construction applications, Electronics and electrical engineering applications, Wood sector applications, Mechanical sector applications, Products and solutions

LASER scanner for dimensional and geometric control of continuous products in the production line

Laser scanning systems are a type of inspection technology used in the manufacturing industry to provide an accurate measurement of the shape and size of products.

Laser technology offers unmatched accuracy when inspecting and measuring complex contoured products, including 3D profiles. Additionally, the speed and reliability with which a laser can perform inspections make it ideal for production lines where speed is of the essence. Laser systems can be used for a variety of applications including dimensional and geometric inspection of continuous products on automated production lines.

A laser beam scanner mainly consists of a laser source, an optical module and a control device. The light source sends a focused beam of high energy onto the surface of the product under investigation. The optical module converts the reflective beam into an electrical impulse which is then processed by a control device. The device allows the laser system to take accurate dimensional and geometric measurements of the product, as well as verify the presence or absence of specific structural properties such as irregular geometries or dimensional variations within defined tolerances.

The main advantage of using laser scanning technology over conventional techniques is accuracy. Since laser scanners can capture detailed information with pinpoint accuracy, there is no need for repeated manual inspections that consume valuable time in automated production lines. The data collected by the sensors can then be viewed as 3D graphs and analyzed to identify any anomalies during the production process before they affect the functionality and performance of the finished product.

The capability of laser scanning technology is not limited only to dimensional inspection but also includes the measurement of the three-dimensional surface of the object under examination and the digital processing of the same data; which will allow industrial operators to easily identify any problems related to the quality of the single piece before it reaches the final stage of the process, thus reducing fatal times due to human error and avoiding too expensive and inefficient and large-scale maintenance solutions.

Laser scanners are measurement and control machines that allow companies to detect the quality of products on the production line. The use of this tool allows to obtain a higher precision in measurement and a higher speed, compared to the use of other methods of inspection. Laser technology also offers the possibility of performing precise dimensional and geometric inspections on products continuously.

These features make laser scanners ideal for inspecting products on a production line faster and more effectively. One particularly important advantage is that many items can be checked at the same time, saving valuable time. For example, companies can use this technology to immediately detect if there is an incorrect assembly, if there has been a defect during the production process or if there has been a dimensional change in the finished product. Furthermore, it is possible to constantly monitor the quality of the product during the production process ensuring that the final quality meets the standards set by the company.

Laser scanners also offer some additional benefits such as the ability to read embossed barcodes or 3D matrix QR codes presented on the parts to be inspected, as well as the ability to read heat marks previously printed on the surface of the material to be inspected. This will allow companies not only to provide real-time feedback on the current status of the product, but also to track essential information relating to the origin and identification of the material used in the production process.

Additionally, thanks to advances in industrial electronics and computer technology, modern laser systems are more accurate and reliable than ever before. The systems incorporate advanced features such as anti-interference algorithms to avoid errors caused by artificially generated light sources or by impulses from other industrial machines. All collected data is transmitted directly to the dedicated software without human intervention to analyze and process them.

Level measurement in tanks, silos or large containers with level display on remote monitors

laser distance meter applications for level measurements in tanks and silos

I laser distance meters RODER LDM42 series provide efficient level measurement in tanks, silos or large containers.

The RODER system offers automatic level up display remote monitors to facilitate monitoring, measurement and traceability of material levels.

It also features a built-in two-way communication system to ensure a accurate data transmission and reliable over long distances.

Thanks to the RODER system, the responsible technicians are able to remotely monitor the contents of the tanks without having to access them. This not only saves time but also money by reducing the labor costs associated with manual access.

RODER LDM42 laser distance meters represent an effective and efficient solution for level measurement in tanks and storage systems.

Benefits

Measuring range up to 30 meters with a millimeter precision, extendable up to 100 meters with reflector.
Robust design, with IP65 degree of protection, also for outdoor installation.
Le small size and low weight make it easy to install and maintain in any environment, without the need for special tools or equipment.
Advanced optical filtering prevents false readings caused by ambient light interference, allowing for more reliable measurements over greater distances and with higher accuracy than traditional sensors.
Easy integration into existing systems thanks to awide choice of analog and digital interfaces, which allow the LASER module to be quickly connected to any controller or device without further hardware modifications or programming efforts on the part of the user.
Il Low energy consumption allows the sensor to work not only on mains power but on battery or other limited energy sources, such as solar cells.
THEhigh immunity to electrical noise makes it suitable for use in industrial environments where high electromagnetic fields are present.
La self-diagnosis function built-in triggers an alarm when errors occur during operation, ensuring greater safety.
Flexible application options: can be used for tasks of continuous monitoring or combined with motion components for dynamic measurement applications.
The functionality of remote monitoring via Ethernet interface allows users to control their distance meters from anywhere in the world via an Internet connection, providing greater flexibility and convenience in collecting data from multiple locations simultaneously.
Il short reaction time ensures fast response even when detecting fast-moving objects, improving overall system performance.
Highly configurable software with extensive customization options.
Temperature compensation capability for increased reliability in various environmental conditions.

Products used

LDM42 series LASER distance meters

LASER distance meters for distance measurements up to 30 meters on natural surfaces or 100 meters with reflector
Power supply 24 Vdc
RS232 - RS422 interfaces - Profinet, Profibus and Ethernet / IP
Visible LASER emitter (red) with safety class 2
Accuracy up to +/- 1 mm
Wide range of accessories for high temperature environments or for environments with high contaminants

More information …..

LDM300 series LASER distance meters

LASER distance meters for distance measurements up to 3000 meters
Power supply 24 Vdc
RS232 - RS422 interfaces
Wide range of accessories
Suitable for monitoring the position of large structures and objects

More information …..

Learn more

I laser distance meters RODER provide highly accurate and reliable level measurement with pinpoint accuracy and fast response times, ideal for silo and tank level measurement.

Laser distance meters are easy to install, they do not require recalibration and require minimal maintenance over their lifetime.

The non-contact nature of the laser sensor eliminates potential safety or contamination issues associated with the measurement of liquids in tanks, due to contact measurement methods.

The flexibility of laser distance meters allows them to be used in a variety of applications, such as the monitoring of liquid level changes in large storage tanks or identifying blockages or blockages in pipelines, as well as providing continuous level readings from multiple points simultaneously.

The ability to measure distances up to 100m makes them suitable for large warehouses where more traditional level sensors may not be usable due to the limitations of their range.

Laser distance meters they are able to measure horizontal and vertical distances without the need for direct contact or line-of-sight access, making them ideal for hard-to-reach places or awkward locations within silos and tanks.

They are extremely affordable compared to other non-contact sensors - they can be purchased at a lower cost compared to traditional ultrasonic level sensors or radar systems which require additional hardware and cabling costs.

Rated to IP65, these laser distance meters can be used outdoors even when exposed to rain, snow and other extreme environmental conditions (with suitable enclosures), allowing for greater flexibility during installation and operation in a range of applications within industrial plants and mining operations where robustness is essential in extreme external conditions (contact our technical support for more information).

By allowing remote control via a digital input/output connection configuration, operations can be controlled from a safe distance which reduces risk factors particularly related to personnel entering confined spaces such as manholes/pits, etc.

Measuring the liquid level inside a tank, silo or large container has never been easier thanks to the RODER LDM-42 laser distance meters. These precision instruments not only measure accurately and reliably, but also display real-time data on remote monitors via Ethernet or Wi-Fi.

RODER LDM42 laser distance meters open up new possibilities for monitoring the amount of liquid stored, so you know exactly when it's time to replenish and maintain inventory levels with confidence.

RODER's LDM42 laser distance meters are the perfect tool for measuring levels in silos and tanks. They offer unmatched accuracy and reliability, with readings consistently accurate to within 1 millimetre.

Data is displayed in real time on remote monitors via Wi-Fi or Ethernet networks, so you don't need to be on site to get up-to-date readings. The data also allows for tracking of inventory levels, so that when it's time to restock, you can be sure you have the right amount on hand.

Another advantage of using RODER LDM-42 laser distance meters is the ease of installation and operation. The meters can be easily mounted to the walls of tanks or silos, and the setup process is simple enough that anyone can do it.

Operation is completely non-contact, so no maintenance is required, other than occasional checks as needed. This makes them an effective choice for both large-scale industrial applications and small installations.

With RODER laser distance meters, even environmental factors such as temperature changes do not affect the readings, as they use retroreflective optical technology. This means that regardless of the extreme conditions, theAccuracy remains constant over long periods of time, with minimal effort on the part of the user.

Last but not least, having access to up-to-date information on the liquid content inside a tank or silo can be invaluable for any process dealing with liquid products: knowing exactly when it is time to order new stocks will save you money and time in the long run and help you stay ahead of your competitors by keeping your warehouses regularly stocked. RODER's LASER distance meters make all of this possible and reliable thanks to their advanced technological capabilities!

Thanks to its unique design and features, the LDM42 laser distance meter maximizes safety in tank level measurement applications. Eliminate manual checking processes that can be dangerous and time consuming. Since it does not require contact with any product, it helps to reduce hazardous conditions in the workplace.

Applications, Automation sector applications, Automotive sector applications, Plant construction sector applications, Electronics and electrical engineering applications, Mechanical sector applications, Metal and semi-finished sector applications, Plastic and rubber applications, Sizes, News from RODER, Products and solutions, Featured products, Instruments, Technology

LVDT linear transducers for dimensional and geometric control

I LVDT linear transducers allow precision measurements on mechanical parts or on any object that can be measured with a contact probe.

Combined with special signal amplifiers they allow the measurement of dimensional characteristics (thicknesses, widths, positions, heights, diameters, ovality) and geometric (flatness, parallelism, perpendicularity, oscillation, eccentricity and coaxiality) with millesimal precision even on complex mechanical parts.

LVDT transducers with spring drive system (with fixed mechanical preload) or LVDT linear transducers with pneumatic drive particularly suitable for automatic measuring systems.

Some families of LVDT probes can be made with a vacuum-based displacement mechanism.

Transducers with radial cable exit, with axial cable exit or with quick connection and disconnection systems are possible.

RODER manufactures complete "turnkey" systems consisting of LVDT probes, amplifiers and electronic controllers, data acquisition systems, software for statistical and mechanical control specially designed.

RODER measurement systems find applications in many industrial sectors: precision mechanics, sheet metal working, plastic moulding, electro-medical, metallurgical and iron and steel.

Continue reading →

Food sector applications, Automation sector applications, Automotive sector applications, Chemical sector applications, Plant construction sector applications, Electronics and electrical engineering applications, Wood sector applications, Mechanical sector applications, Metal and semi-finished sector applications, Plastic and rubber applications, Textile sector applications, Products and solutions

Digital radius and diameter gauge DIACHECK-CT series

The DIACHECK-CT series digital radius and diameter gauge allows direct and instantaneous reading of internal or external radii or diameters in a range between 100 and 10000 mm.

Il High precision digital radius and diameter gauge of the DIACHECK-CT series is designed to measure the radius of cylindrical objects such as pipes, profiles and calenders quickly and accurately.

This measuring instrument allows the measurement of the radius of curvature or, of the internal or external diameter of a certain part using the method of measuring the circumference based on three points.

Technical features

This radius gauge allows direct and instantaneous reading of inside or outside radius values for a wide range of curves, profiles, diameters and cylindrical objects.

Comfort: there is no need to cut out templates to find out the radius of a curve, nor to remove the piece from the machine to measure it and not even to extract the part from its installation location (for example underground pipes, installed tanks, positioned and fixed calenders)
Ease of use: it's easy to use and the measurement process is lightning fast. Simply place the gauge inside or outside the curve to automatically obtain the value of the radius of curvature or the diameter of the object.
Multi-material: the gauge is suitable for any type of solid material such as steel, wood or plastic materials.
High precision: the margin of error on the radius is only 0,1 mm (the measurement accuracy depends on the superficial quality of the solid to be measured and it is necessary to work on a surface without depressions or with high surface roughness to obtain maximum precision).
Field of application: this radius gauge is supplied with different measuring arcs and with different angles of support. The use of the various arcs offers a measurement range between 100 and 10000 mm.

Innovative and versatile

Battery Powered LCD Digital Display: comfortable reading of the measured value with the possibility of transferring the measured value to a acquisition system based on Bluetooth interface.
Practical: it is small and light and can be easily used for different measurements by simply changing the measuring head.
Transport: An aluminum case with internal foam protection is available to store and protect the meter when not in use. Convenient to carry and shock resistant.
Two units of measurement: you can choose whether to measure in millimeters or inches just press the unit conversion button.
Ideal for large radii: the measuring tool can measure radii up to 10 meters with the highest precision.

Download the brochure ( ITA )

Typical applications

Measurement of bend radius of bent pipes.
Measure of outer diameter of pipes and ducts (even if already positioned or buried).
Measure of internal diameter of ribs and large pipes.
Measure of radius of curvature of curved sheet metal.
Diameter measurement of large tanks or silos, both during the construction of the individual parts and during assembly and positioning.

diacheck instrument for measuring the diameter, angle and radius of curvature of pipes, tanks, ribs, plates.

Measurement of the radius of curvature of molded or thermoformed plastic parts.
Measurement of the radius of curvature of laminated and curved beams.
Shape measurement of stamped details or curved sheet metal intended for the furniture sector.
Measurement of glass curvature or artifacts with complex geometric shapes.
Verify e comparison of the mathematical model of geometric shapes produced by CNC.
Verification of bending of pipes and fittings.

Measurement of glass curvature and mating profiles.
Measure of the rcurvature of car bodies and sheet metal parts for the automotive sector.
Measurement of diameter of ribs for tunnels or for construction.
Measurement of the radius of curvature of cement and concrete products.
Measurement of the radius of curvature or the diameter of parts intended for the naval sector or the construction of large structures.

Measurement of the bending radius of profiles during processing on profile bending machines, bending machines and forming systems.
Measurement of the diameter of pipes and of the coupling taper for the hydrocarbon, water and liquid transport sector.
Measurement of the degree of taper of mating flanges for pipes or tanks.
Measurement of the diameter or radius of curvature of calendered or welded products.
Verify proper fit of parts during mating and sealing.

Do you want help in choosing the product?

SB-1000 series LASER micrometers for non-contact diameter and width measurement

Laser micrometers for diameter and width measurement on the production line. The measurement of diameter and width with laser micrometers allows the control of the dimensions of continuous products directly on the production line, without contact and in maximum safety for the operator.

laser micrometer for diameter and ovality measurement on wires, pipes, cables, bars and rods

LASER micrometers for diameter measurement and ovalization on cylindrical parts directly in production line or in the metrological laboratory.

Measurements of wires, pipes, cables, bars, plugs, extruded and drawn parts.

Comparison with tolerance thresholds and alarms for reporting a non-compliant product.

Possibility of transmitting the data to an external PLC or to a data acquisition system or to a management system.

Applications on drawing, profiling, extrusion, grinding, automatic assembly lines.

SB-1000 series LASER micrometers

laser micrometer for width and edge position measurements of belts and carpets

A wide range of application modes to make high-precision measurements with ease.

The SB-1000 Series consists of a range of high precision intelligent sensors, which guarantee high performance at low cost and are equipped with the most advanced functions for operation on the production line.

The technology and functions developed for high precision measuring instruments ensure high levels of accuracy.

The solid construction of the SB-1000 series devices makes it possible to use them even in harsh environments. Easy to use, they allow you to perform fast and stable measurements.

The newly developed optical system enables high levels of stability and measurement accuracy to be achieved.

Multiple wavelength LASER micrometers

laser micrometer for edge and position measurement on belts and carpets

In traditional lasers, the transmission beam produces a pattern a
accumulation points. This is an interference problem specific to the laser, caused by the fact that it has only one wavelength. Thanks to the use of a multi-wavelength laser, the RDSB series sensor does not exhibit this unwanted behavior. Since the shadow projections that form on the CCD are sharper, the sensor maintains a high level of stability, even with hard-to-detect targets such as transparent objects.

The parallel processing processor DSP, built into the receiver, allows the sensor to process data at high speeds, thus reducing noise and measurement error levels to a minimum.

Typical applications

Edge control and position detection in tape, sheet or panel production lines
External diameter measurement of wires, pipes, cables, rods, plugs
Method of measuring internal diameter or gap in rings or gaskets
Distance measurement between the end of the measurement range and the edge of a target in automatic assembly lines
Measurement of width or position in extrusions or irregular profiles.
Pin height measurement or correct insertion of components in mounting seats.

Do you want help in choosing the product?

Products for this application

Laser micrometers

Automation sector applications, Automotive sector applications, Plant construction sector applications, Railway sector applications, Mechanical sector applications, Metal and semi-finished sector applications, Products and solutions

DIACHECK measuring instruments for internal diameter measurements

Measuring instruments with LVDT transducers for diameter, ovality, taper and concentricity measurements of internal diameters. Measuring instruments for use on manual, semi-automatic and automatic measuring benches.

Custom measuring pads for precision measurements of internal diameters, ovality, taper and concentricity.

Multilevel diameter, ovality, concentricity and taper measurement with a single tool and with a single positioning operation.

Measurements of bearing seats, cylinder liners, internal diameters of gears, counterbore and driving seats, ground tubes and precision holes.

Measurement survey with manual, semi-automatic or fully automatic positioning on robotic production lines.

Measurement of diameter and taper

The measuring instruments for internal diameters allow the measurement in a single operation of internal diameters, ovalizations, tapers and concentricity.

The new range of RODER DIACHECK series measuring pads allow the measurement of internal diameters of cylindrical parts such as bearing seats, precision counterbore, seats for driving gears.

The DIACHECK series of pads is made up of customized mechanics to accommodate a large number of measurement transducers.

This feature allows the creation of measuring instruments with the possibility of measuring a very large number of dimensional and geometric characteristics in a single operation.

With a single measurement operation it is possible to detect:

Upper section diameter 0 °
Upper section diameter 90 °
Ovalization of the diameter in the upper section
Bottom section diameter 0 °
Bottom section diameter 90 °
Ovalization of the diameter in the lower section
Taper of the upper section with respect to the lower section
Concentricity of the upper section with respect to the lower section

Measurement stations

control station PCL1208 RODER embedded system for quality control

The PCL1208 control station allows data acquisition and display of the control result.

The visualization takes place on a display with built-in touch screen which also allows the programming of control recipes and the management of any interfaces with the production system.

The PCL1208 control station can be easily integrated into Industry 4.0 systems and can be connected to PLC, HMI and SCADA through Profinet, Profibus, Ethercat, Canbus or Ethernet IP interfaces.

Do you want help in choosing the product?

Products for this application

PCL1208 control stations

Food sector applications, Automation sector applications, Automotive sector applications, Chemical sector applications, Railway sector applications, Wood sector applications, Mechanical sector applications, Metal and semi-finished sector applications, Plastic and rubber applications, Textile sector applications, University and research sector applications, Solutions in evidence

Stroboscopes for speed measurement and preventive maintenance

Stroboscopes for speed measurement and preventive maintenance in the industrial sector. LED stroboscopes for quality control and inspection of moving objects.

Measurement applications of print speed and quality in the printing industry, directly on the production line, without downtime or slowing down the process.

Applications of observation of repetitive movements for the determination of any assembly errors or preventive wear of moving parts.

Measurement visualization on easily readable display and controls designed for easy synchronization of the number of flashes per second with the process under observation.

Battery powered models for easy and easy transport or with mains power supply for fixed applications on production lines.

Stroboscopes are tools that allow you to observe and studying an object in motion, which can be rotary or oscillatory, as if it were stationary, as well as measure its speed.

The operating principle is based on the observation, in low light conditions, of the object in constant motion, illuminated by very short flashes of high intensity light.

When you observe a perfectly still image of the object in motion, it means that the flashing frequency of the stroboscope coincides with the speed of rotation or of the oscillatory motion. speed measurement itself, without any contact with the moving mechanism

The main element consists of a special xenon or LED lamp capable of emitting up to 5000 flashes per second, or 300000 per minute. This very high frequency value allows you to observe an object that cyclically moves, vibrates or rotates on its axis even at very high frequencies.

Continue reading →

Plant construction sector applications, Mechanical sector applications, Metal and semi-finished sector applications, Products and solutions

Settlement control systems for gear sets and bevel gears

Profile detection of pressed, sheared, drawn or welded sheet metal parts with extraction of geometric or dimensional information

Measure of angles, distances, openings, positions to verify the correct execution of the workings or as preparation for welding and assembly operations

Comparison with the mathematical model for the determination of controlling shares

Applications on robotic islands, on Cartesian axes or on automatic assembly islands