DL3 series LED illuminators

High brightness LED
Use of latest generation LEDs with high efficiency and brightness
HTTM technology
HTTM (Patent Pending) technology for efficient disposal of the heat produced by the LEDs
Body in anodized aluminum
Body made of anodized aluminum for greater heat dissipation and excellent structural rigidity
Test certificate
Each illuminator produced is equipped with a serial number and a test certificate created after 48 hours of testing in our laboratory
Industrial connector
The power supply connection is made with a 8-pole M3 industrial connector for quick and easy disconnection in case of maintenance or replacement
Reduced thickness
The use of SMD technology allows to obtain an illuminator with reduced thickness and dimensions.

Product description

LED illuminators for direct lighting in artificial vision applications. Version with high intensity LED for systems with high recovery speed.

RODER SRL presents the new DL3 series LED matrix illuminators for lighting applications artificial vision, manual inspection, microscopes, optical machines and generic lighting.

The DL3 series of illuminators is built with the latest generation of LEDs, capable of guaranteeing high brightness (up to 660 lumens), low consumption (less than 10 W at maximum brightness), high luminous efficiency (up to 110 lm / w) and an average life of over 50000 operating hours (equal to 5 years of continuous use or 10-11 years of discontinuous use).

It is possible to choose between different sizes (25 × 150, 50 × 75 mm, etc) and different wavelengths. Custom versions are also available, made to specification and with customized characteristics.

The container of the DL3 series is in anodized aluminum, which gives the illuminator a good aesthetic finish and high heat dissipation. The protection of the optics is carried out with a polycarbonate glass with anti-scratch and anti-aging treatment, removable and replaceable in case of damage.

The cable with connector allows an easy and quick disconnection from the power supply unit for maintenance or cleaning operations.

The use of HTTM® technology (High Thermal Transmission Material - Roder Electronics Trademark) allows an adequate heat dissipation, a good chromatic stability of the illuminator and a long operating life of the illuminator.

Combined with the power supplies and controllers of the DRV series it is possible to obtain complete lighting systems, with various supply voltages, the possibility of pulsed control, external synchronization, controlled overcurrent and linear partialisation.

The small size of the illuminator also allows installation in compact automatic machines and automatic production systems.


Composition of the product code

PL-DL3-XXXYYY-ZZZ-W00000

  • XXX : Width of the LED emission area in mm
  • YYY : Length of the LED emission area in mm
  • ZZZ : Color of the light source
  • W : Type of power supply

DL3 series - 25 x 150

  • LED illuminators with 25 x 150 lighting area
  • Power supply 350 mA
  • Connection with 8-pole M3 industrial cable
  • Anodized aluminum container
  • Emission angle +/- 50 °
  • Easily integrated into measuring and visual inspection machines
  • Flat profile
CodeModelDescriptionDocumentation
XX-XX-XX
PL-DL3-025150-WHI-A00000
Illuminator a White LED 25 × 150 mmProduct details
XX-XX-XX
PL-DL3-025150-RED-A00000
Illuminator a Red LED 25 × 150 mmProduct details
XX-XX-XX
PL-DL3-025100-BLU-A00000
Illuminator a Blue LED 25 × 150 mmProduct details

DL3 series - 50 x 75

  • LED illuminators with 25 x 200 lighting area
  • Power supply 350 mA
  • Connection with 8-pole M3 industrial cable
  • Anodized aluminum container
  • Emission angle +/- 50 °
  • Easily integrated into measuring and visual inspection machines
  • Flat profile
CodeModelDescriptionDocumentation
XX-XX-XX
PL-DL1-050075-WHI-A00000
Illuminator a White LED 50 × 75 mmProduct details
XX-XX-XX
PL-DL1-050075-RED-A00000
Illuminator a Red LED 50 × 75 mmProduct details
XX-XX-XX
PL-DL1-0500756-BLU-A00000
Illuminator a Blue LED 50 × 75 mmCard product