DL3M series miniaturized LED illuminators
- Spot illuminator with single LED.
- Container in anodized aluminum.
- LED with integrated lens.
- Available in more than twenty sizes and different wavelengths.
- HTTP technology.
Main characteristics
- Matrix of high brightness and low consumption LEDs
Use of latest generation LEDs with high efficiency and brightness combined with low energy consumption
- HTTM technology
HTTM technology ( RODER Patent Pending ) for efficient dissipation of the heat produced by the LEDs. The heat produced by the LEDs is transferred to the outside through a material with high thermal conductivity.
- Integrated driver
All the LED illuminators of the DL1 series integrate drivers for stabilizing the LED current and allow to operate with a direct 24 Vdc power supply, keeping the light emission constant and guaranteeing a high homogeneity of the light emission matrix.
- Body in anodized aluminum
Body made of anodized aluminum for greater heat dissipation and excellent structural rigidity.
- Test certificate
Each illuminator produced is equipped with a serial number and a test certificate created after 48 hours of testing in our laboratory
- Industrial connector
The power supply connection is made with a 8-pole M3 industrial connector for quick and easy disconnection in case of maintenance or replacement
- Reduced thickness
The use of SMD technology allows to obtain an illuminator with reduced thickness and dimensions, allowing installation even in compact automatic machines and automatic production systems.
Related items
Composition of the product code
PL-DL3M-XXXYYY-ZZZ-W00000
XXXYYY – Width and length of the LED emission area expressed in mm
025100: LED illuminator with 25 mm x 100 mm illumination matrix
025200: LED illuminator with 25 mm x 200 mm illumination matrix
025300: LED illuminator with 25 mm x 300 mm illumination matrix
ZZZ : Color or wavelength code of the light source
WHI: white color – 5500K
RED: red color – wavelength 625 nm
BLUE: blue color – wavelength 470 nm
GRE: green color – wavelength 625 nm
INF: infrared color – wavelength 880 nm
ULV: ultraviolet color – wavelength 395 nm
YEL: yellow color – wavelength 500 nm
W: Type of power supply
A: standard 24 VDC power supply
Typical applications
Control and measurement of parts in transit on conveyor belts.
The DL1 series LED illuminators can be installed in a multi-angle configuration to illuminate objects with irregular shapes and with the possibility of limiting shaded areas.
The fixing brackets can be adjusted for a direct light emission in the area affected by the vision system.
Combined with the VISION CHECK family of vision systems, the DL1 series illuminators constitute an “all-in-one” vision system perfectly integrated into the production line and with the possibility of exchanging data and reports with PLC, SCADA and management systems.
RODER SRL presents the new DL3 MINI series LED spotlights for artificial vision, manual inspection, microscopes, optical machines and generic lighting applications.
The DL3 MINI series of illuminators is built with the latest generation of LEDs, capable of guaranteeing high brightness (up to 110 lumens), low consumption (less than 2 W at maximum brightness), high luminous efficiency (up to 110 lm / w) and an average life of more than 50000 operating hours (equal to 5 years of continuous use or 10-11 years of discontinuous use).
It is possible to choose between different wavelengths. Custom versions are also available, made to specification and with customized characteristics.
The container of the DL3 MINI series is in anodized aluminum, which gives the illuminator a good aesthetic finish and high heat dissipation. The protection of the optics is carried out with a polycarbonate glass with anti-scratch and anti-aging treatment, removable and replaceable in case of damage.
The cable with connector allows an easy and quick disconnection from the power supply unit for maintenance or cleaning operations.
The use of HTTM® technology (High Thermal Transmission Material - Roder Electronics Trademark) allows an adequate heat dissipation, a good chromatic stability of the illuminator and a long operating life of the illuminator.
Combined with the power supplies and controllers of the DRV series it is possible to obtain complete lighting systems, with various supply voltages, the possibility of pulsed control, external synchronization, controlled overcurrent, linear partialisation.
The small size of the illuminator also allows installation in compact automatic machines and automatic production systems.
Models in the catalog
Code | Model | Description |
XX-XX-XX | DL3M-PL-025100 00000-WHI-AXNUMX | 25 x 100 white LED illuminator |
XX-XX-XX | DL3M-PL-025100 00000-RED-AXNUMX | 25 x 100 red LED illuminator |